pl01s/d series 1w dc/dc converter, sip-package , wide 2:1 input range ds_pl01s/d_07192012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p1 features ? efficiency up to 80% ? wide 2:1 lnput range ? fully regulated outputs ? operating temperature range -40c to +85c ? low ripple and noise ? isolation voltage 1500vdc ? short-circuit protection ? lead free, rohs compliant ? 3 years product warranty the pl01s/d series are miniature, sip package, isolated 1w dc/dc converters with 1,500vdc isolation. it offers continuous short circuit protection and allows a wide operating temperature range of ?40c to +85c. these isolated dc/dc converters are t he latest offering from a world leader in power systems technology and manufacturing D delta electronics, inc model list output current input current efficiency (typ.) input voltage (range) output voltage max. @max. load @no load max. capacitive load reflected ripple current @max. load model number vdc vdc ma ma(typ.) ma(typ.) f ma (typ.) % pl01s0505a 5 200 263 1680 76 pl01s0512a 12 83 259 820 77 pl01s0515a 15 67 254 680 79 pl01d0512a 12 42 262 470* 77 pl01d0515a 5 (4.5 ~ 9) 15 33 254 40 330* 80 78 pl01s1205a 5 200 108 1680 77 pl01s1212a 12 83 108 820 77 pl01s1215a 15 67 105 680 80 pl01d1212a 12 42 106 470* 79 pl01d1215a 12 (9 ~ 18) 15 33 106 20 330* 40 78 pl01s2405a 5 200 54 1680 77 pl01s2412a 12 83 52 820 80 pl01s2415a 15 67 52 680 80 pl01d2412a 12 42 53 470* 80 pl01d2415a 24 (18 ~ 36) 15 33 52 10 330* 30 80 pl01s4805a 5 200 27 1680 77 pl01s4812a 12 83 27 820 78 pl01s4815a 15 67 27 680 78 pl01d4812a 12 42 27 470* 79 pl01d4815a 48 (36 ~ 75) 15 33 26 7 3308 20 79 * for each output
ds_pl01s/d_07192012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p2 input characteristics parameter model min. typ. max. unit 5v input models -0.7 --- 15 12v input models -0.7 --- 25 24v input models -0.7 --- 50 input surge voltage (1 sec. max.) 48v input models -0.7 --- 100 5v input models --- --- 4.5 12v input models --- --- 9 24v input models --- --- 18 start-up threshold voltage 48v input models --- --- 36 vdc internal filter type all models capacitor output characteristics parameter conditions min. typ. max. unit output voltage setting accuracy at 50% load and nominal vin --- --- 1.0 %vnom. line regulation vin=min. to max. --- --- 0.2 % single output models --- --- 1.0 % no load to full load dual output models --- --- 1.0 % single output models --- --- 0.5 % load regulation 10% to 90% load dual output models --- --- 0.8 % min.load no minimum load requirement ripple & noise (20mhz) --- 50 --- mv p-p transient recovery time 25% load step change --- 250 --- sec temperature coefficient --- --- 0.02 %/ short circuit protection continuous general characteristics parameter conditions min. typ. max. unit i/o isolation voltage (rated) 60 seconds 1500 --- --- vdc i/o isolation resistance 500 vdc 1000 --- --- m ? i/o isolation capacitance 100khz, 1v --- --- 50 pf switching frequency --- 250 --- khz mtbf(calculated) mil-hdbk-217f@25 , ground benign 2,800,000 --- --- hours environmental characteristics parameter conditions min. max. unit operating ambient temperature range (see power derating curve) natural convection -40 +85 case temperature --- +105 storage temperature -55 +125 humidity (non condensing) --- 95 % rel. h lead temperature (1.5mm from case for 10sec.) --- 260
ds_pl01s/d_07192012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p3 power derating curve ~ ambient temperature 0 20 40 60 80 100 -40 0 20 60 100 110 80 40 natural convection c notes 1 specifications typical at ta=+25 , resistive load, nominal input voltage, rated output current unless otherwise noted. 2 ripple & noise measurement bandwidth is 0-20 mhz. 3 all dc/dc converters should be externally fused at the front end for protection. 4 that ?natural convection? is about 20lfm but is not equal to still air (0 lfm). 5 specifications subject to change without notice. mechancial drawing mechanical dimensions pin connections pin single output dual output 1 -vin -vin 2 +vin +vin 4 +vout +vout 5 no pin common 6 -vout -vout ? all dimensions in mm (inches) ? tolerance: x.x0.5 (x.xx0.02) x.xx0.25 ( x.xxx0.01) ? pins 0.05(0.002) physical outline case size : 17.0x7.62x11.0mm (0.67x0.30x0.43 inches) case material : non-conductive black plastic (flammability to ul 94v-0 rated) pin material : alloy 42 weight : 12.9g 11.0 [0.43] 0.5 [0.02] 0.5 [0.02] 3.2 [0.13] 7.62 [0.30] 17.0 [0.67] 2.5 [0.10] 0.25 [0.01] 16.0 [0.63] 0.50 [0.02] 2.15 [0.08] 2.54 [0.10] 5.08 [0.20] 2x2.54 [2x0.10] bottom view 1 2 4 56
ds_pl01s/d_07192012 e-mail: dcdc@delta.com.tw http://www.delta.com.tw/dcdc p4 part numbering system p l 01 s 05 05 a form factor family series watt number of outputs input voltage output voltage option code d-dip a~z 01:1w s - single 03:3.3v 03:3.3v a - std. functions p-sip 02:2w d- dual 05: 5v 05: 5v s-smd 03:3w 12:12v 12:12v 04:4w 24: 24v 15: 15v 06:6w 48:48v 24: 24v warranty delta offers a three(3) years limited warranty. complete warranty information is listed on our web site or is available upon re quest from delta. information furnished by delta is believed to be accurate and reliable. however, no responsibility is assumed by delta for its use, nor for any infringements of patents or other rights of third parties, which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of delta. delta reserves the right to revise these specifications at any time, without notice.
|
